Virginia
Regulated Medical Waste
Definition of Regulated Medical Waste
In
Virginia, a solid waste is considered a RMW if it is capable
of producing an infectious disease in humans or if it is not
excluded under the regulations. RMW includes:
- Cultures
and stock of microorganisms and biologicals;
- Human
blood and human body fluids;
- Tissues
and other anatomical wastes;
- Sharps.
(needles, syringes, etc.);
- Animal
carcasses, body parts, bedding and related wastes;
- Any
residue or contaminated soil, water, or other debris resulting
from
the cleanup of a spill of any RMW;
- Any
solid waste contaminated by or mixed with RMW.
Managing Regulated Medical Waste
Permit Requirements
If you treat, store, or dispose of RMW, you are required to
have a permit for the management of RMW, unless exempt under
the regulations.
Permit-by-Rule
Facilities that meet the following conditions may be qualified
to operate under a permit for RMW management activities and
their owners or operators are not required to comply with permit
issuance procedures:
- The
facility and all RMW activities are in compliance with all
state and
local requirements;
- More
than 75% (by weight, in a calendar year) of all RMW that is
stored, treated or disposed of by the facility is generated
on-site;
- No
RMW is transported from or received by the facility without
being properly packaged and labeled. Facilities storing RMW
will
indicate the first date that the waste was placed in storage
date on the outer packaging of the RMW;
- The
activities at the facility do not involve the placing of RMW
directly into or on the land;
- The
owner or operator of the facility has notified the director
in writing
that the facility is operating under an on-site permit
by rule;
- The
owner or operator of the facility has submitted to the director
a
certification from the local governing body, without qualifications,
conditions, or reservations, that the location and operation
of the facility are consistent with all applicable ordinances;
- The
owner or operator of the facility has submitted to the director
appropriate
Key Personnel Disclosure Statements;
- A
person certified by the Board of Waste Management Facility
Operators will operate the facility.
Packaging and Labeling
Generators of RMW are responsible for the packaging and labeling
of the wastes. Once a bag or container becomes full, it must
be sealed, labeled and managed in accordance with the regulations.
Contractors or other agents may provide services to the generator,
including packaging and labeling of RMW, if the packaging or
repackaging is performed on-site where the RMW was generated
and no transportation, storage, treatment or disposal occurs
prior to the packaging or repackaging.
All RMW shall be packaged as follows:
- When
RMWs are discarded, they shall be placed in containers
that meet the requirements of the standards for occupational
exposure
to bloodborne pathogens. The general industry standard
requires
the packaging to be closable, constructed to prevent
leakage, labeled with the biohazard symbol, and closed to prevent
spillage during handling. Upon being placed in storage, red
bags
shall
be used for the packaging of all RMW. Packaging shall
be labeled as required;
- Contaminated
sharps shall be placed directly in containers as required
by the general industry standards. The containers shall be
labeled
as required;
- As
bags and containers become full, they shall be sealed such
that no waste materials can leak;
- Prior
to transporting RMW, waste will be packaged for transportation
in accordance with the standards of 49 CFR Part 173 or
packaged in accordance with an exemption approved by the United
States
Department of Transportation;
- Waste
shall be labeled. The label shall be securely attached to or
printed on packaging. The label may be a tag securely affixed
to the
package. Indelible ink shall be used to complete the information
on the label. The label and the information provided on
the label must be clearly legible. The following information
shall
be included:
- The name, address and
business telephone number of the generator;
- “RMW” in
large print; and
- The Biological
Hazard Symbol.
- All
etiological agents that are transported must be packaged and
labeled
in accordance with federal and other applicable regulations;
- Sharps must be placed directly into puncture resistant containers
as
required by the general industry standards in 16VAC25-90-1910.1030(d)(4)(iii)(A);
and
- Persons
packaging RMW shall wear appropriate items of personal
protective equipment
Reusable
Containers
RMW may be conveyed in reusable carts or containers under the
following conditions:
- The
waste in the cart or container is packaged and labeled
fully in accordance with state regulations;
- Immediately
following each time a reusable cart or container is
emptied and prior to being reused it is thoroughly cleaned
with
detergent or general purpose disinfectant; and
- When
reusable carts or containers containing RMW are used
for off-site transport, all aspects of the cart or container
management shall comply with all applicable federal
Department
of Transportation Hazardous Material Regulations.
Spill
Containment and Cleanup Kit
All
RMW management facilities are required to keep a spill containment
and cleanup kit within the vicinity of any area where RMW
is managed. The kit location shall provide for rapid and
efficient cleanup of spills anywhere within the area. All
vehicles transporting RMWs are required to carry a spill
containment and clean up kit whenever RMWs are conveyed.
Containment
and Cleanup Procedures
If
there is a RMW spill, the following procedures shall be
implemented:
- Take appropriate precautions to ensure personnel
do not come
into contact with any contaminants by wearing appropriate
personal protective equipment;
- Repackage
spilled waste in accordance with required packaging
requirements;
- Transport
any regulated medical waste by a registered transporter;
- Clean
and disinfect any areas having been contacted by RMW.
- Materials
used to decontaminate the area will be disinfectants
effective against mycobacteria; and
- Take
necessary steps to replenish containment and cleanup kit.
Treatment
and Disposal
- All
regulated medical waste must be incinerated, sterilized
by steam, or treated by a method as described in the RMW
regulations.
- No
RMW shall be disposed of in a solid waste landfill or other
solid waste management facility. Upon authorized treatment
and management, the solid waste or its ash is not RMW and
may be disposed of at any permitted landfill or other permitted
solid waste management facility.
- Regulated
medical waste in closed bags or containers shall not be
compacted or subjected to violent mechanical stress; however,
after
it is fully treated and it is no longer regulated medical
waste, it may be compacted in a closed container.
Closure
Requirements
When
a facility that has been used for RMW management is to cease
operations involving regulated medical wastes, it shall be
thoroughly cleaned and disinfected. All RMW shall be disposed
of, and all equipment decontaminated.
Recordkeeping
Requirements
Unless
a generator is exempt from recordkeeping requirements, generators
and RMW management facilities shall maintain the following
accurate records for three years:
- A
list of the members of any committee for the management
of infection control for the facility, their address, their
phone numbers and the period of their membership;
- The
date, persons involved and short description of events
in each spill of more than 32 gallons of regulated medical
waste or one quart of regulated medical waste consisting
of free
liquid;
- A
notebook or file containing the adopted policies and
procedures of the facility for dealing with regulated medical
wastes;
- A
log of all special training received by persons involved
in regulated medical waste management; and
- A
log of regulated medical waste received from off-site,
the generator, the amount and its storage and receipt dates.
Records shall be maintained for a period of three years
and be available for review.
All
RMW management facilities shall maintain the following
accurate records:
- A
signed certificate for each load received in which
the generator affirms that the load does not contain hazardous
waste or
radioactive materials; and
- A signed
and effective contract, inclusive of all loads received
from a generator, in which the generator affirms that all loads
will not contain hazardous waste radioactive materials,
except
as provided under the regulations.
Transporting
Regulated Medical Waste
- All
transporters must be registered with the DEQ prior to transporting
any RMW and been issued a registration number.
- RMW stored
for more than seven days must be refrigerated and kept at
an ambient temperature between 35 and 45 degrees Fahrenheit.
A vehicle that is parked
for more than 24 hours during transport will be considered a storage facility.
- A covered loading area is not required if
RMW are in a container that is resistant to the elements
- Transporters
must keep transport vehicles sanitized and decontaminated.
OSHA
Regulations
HERC
OSHA State Page
In
addition to the state medical waste environmental regulations
there are some Occupational Safety and Health Administration
(OSHA) rules that apply to medical/infectious waste. Virginia
is one of 21 states operating an approved occupational safety
and health program. This program is operated by the Virginia
Department of Labor and Industry. OSHA rules (Occupational
Exposure to Bloodborne Pathogens Standards) impact various
aspects of medical/infectious waste, including management
of sharps, requirements for containers that hold or store
medical/infectious waste, labeling of medical/infectious
waste bags/containers, and employee training. These
requirements can be found in the HERC section entitled OSHA Standards for Regulated Waste
Statutes,
Regulations and Guidelines
Virginia Waste Regulations
– Chapter 120
Contacts
Virginia Department of
Environmental Quality Waste Management
More
Information
Management of Regulated
Waste – Guidance
|